The LM9022 is a bridged power amplifier capable of delivering typically 2W of continuous average power into a 10 filament load when powered by a 5V power supply. To conserve power in portable applications, the LM9022\'s micropower shutdown mode (IQ = ...
The STFPC311 is a complete, low-cost,
integrated solution for controlling and driving a
front panel Vacuum Fluorescent Display (VFD). It
is ideal for decreasing power consumption in
standby mode by reducing the application standby
current to a ...
The STFPC320 is designed to integrate the VFD
driving, key-scan matrix, LED driving, infrared (IR)
remote control decoding and real-time clock
(RTC) into one integrated solution. All functions
2
are programmable using the I C bus. Low power ...
The STM86312 is a VFD (Vacuum Fluorescent
Display) controller/driver that is driven on a 1/4 to
1/11-duty factor. It consists of 11-segments output
lines, 6 grid output lines, 5 segments/grid output
drive lines, a display memory, a control circuit, ...
STV7710 is a driver for vacuum fluorescent
display (VFD) designed in the ST proprietary BCD
high voltage technology. Using a 1 bit wide data
bus, it can control 96 high current & high voltage
outputs. The STV7710 is supplied with a
separated 70V ...
The MAX6921/MAX6931 are 20-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface a multiplexed VFD tube to a VFD controller, such as the MAX6850-MAX6853, or to a microcontroller. The MAX6921/MAX6931 are also ideal for driving static VFD ...
The MAX6921/MAX6931 are 20-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface a multiplexed VFD tube to a VFD controller, such as the MAX6850-MAX6853, or to a microcontroller. The MAX6921/MAX6931 are also ideal for driving static VFD ...
The MAX6920 is a 12-output, 76V, vacuum fluorescent display (VFD) tube driver that interfaces a multiplexed VFD tube to a VFD controller such as the MAX6850-MAX6853 or to a microcontroller. The MAX6920 is also ideal for driving either static VFD tubes or ...
The MAX6852 compact vacuum-fluorescent display (VFD) controller provides microprocessors with the multiplex timing for 5 x 7 matrix VFD displays up to 96 characters and controls industry-standard, shift-register, high-voltage grid/anode VFD tube drivers. The ...
The MAX6955 is a compact display driver that interfaces microprocessors to a mix of 7-segment, 14-segment, and 16-segment LED displays through an IC-compatible 2-wire serial interface. The MAX6955 drives up to 16 digits 7-segment, 8 digits 14-segment, 8 digits ...
The MAX6850 compact vacuum-fluorescent display (VFD) controller provides microprocessors with the multiplex timing for 7-segment, 14-segment, or 16-segment alphanumeric VFD displays up to 96 characters and controls industry-standard, shift-register, ...
The MAX6853 compact vacuum-fluorescent display (VFD) controller provides microprocessors with the multiplex timing for 5 x 7 matrix VFD displays up to 96 characters and controls industry-standard, shift-register, high-voltage grid/anode VFD tube drivers. The ...
The MAX6851 compact vacuum-fluorescent display (VFD) controller provides microprocessors with the multiplex timing for 7-segment, 14-segment, or 16-segment alphanumeric VFD displays up to 96 characters and controls industry-standard, shift-register, ...
The HT16514 is a Vacuum Fluorescent Display, VFD controller/driver with dot matrix VFD display. It consists of 80 segment output lines and 24 grid output lines. It can display up to
16Cx2L, 20Cx2L, 24Cx2L.
The HT16514 has a character generator ROM which ...
HT16511 is a VFD (Vacuum Fluorescent Display) controller/driver that is driven on a 1/8 to 1/16 duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output drive lines, 5 LED output ports, a control circuit, a display ...
HT16512 is a VFD (Vacuum Fluorescent
Display) controller/driver that is driven on a 1/4 to
1/11 duty factor. It consists of 11 segment output lines,
6 grid output lines, 5 segment/grid output drive lines, 4
LED output ports, a control circuit, a display ...
HT16515 is a VFD (Vacuum Fluorescent Display) controller/driver that is driven on a 1/4 to 1/12 duty factor. It
consists of 16 segment output lines, 4 grid output lines, 8 segment/grid output drive lines, 4 LED
output ports, a control circuit, a display ...
The HT16561 provides direct drive to VFD panels to implement a 12 hour clock function. In addition to obtaining its time base from a 4.194304MHz crystal oscillation source and in having a wide operating voltage, the device also contains a host of other ...
The HT16562 provides direct drive to VFD panels to implement a 12 hour clock function. Obtaining its time base from a 4.194304MHz crystal oscillation source and in having a wide operating voltage due to its internal voltage regulator, the device also contains ...
The HT16565 provides direct drive to VFD panels to implement a 24 hour clock function. In addition to obtaining its time base from a 4.194304MHz crystal oscillation source and in having a wide operating voltage, the device also contains a host of other ...
The HT16566 provides direct drive to VFD panels to implement a 24 hour clock function. Obtaining its time base from a 4.194304MHz crystal oscillation source and in having a wide operating voltage due to its internal voltage regulator, the device also contains ...
The UPD16311 is a FIP (Fluorescent Indicator Panel or Vacuum Fluorescent Display) controller/driver that is
driven on a 1/8- to 1/16 duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output
drive lines, a display ...
The UD16312 is a FIP (Fluorescent Indicator Panel, or Vacuum Fluorescent Display) controller/driver that is driven on a
1/4- to 1/11- duty factor. It consists of 11 segment output lines, 6 grid output lines, 5 segment/grid output drive lines, a
display ...
The
ML9261A is a monolithic IC designed for directly driving the grid and anode of
the vacuum fluorescent display (VFD) tube. The device contains a 60-bit shift
register, a 60-bit register circuit, and 60 VFD tube driving circuits on a
single chip. ...
The ML9212 is a full CMOS controller/driver for Duplex or Triplex (1/2 duty or 1/3 duty) vacuum fluorescent
display tube. It consists of a 32-segment driver multiplexed to drive up to 96 segments, and 10-bit digital dimming
circuit.
ML9212 features a ...
The ML9213 is a full CMOS controller/driver for Duplex or Triplex (1/2 duty or 1/3 duty) vacuum fluorescent
display tube. It consists of a 56-segment driver multiplexed to drive up to 168 segments, and 10-bit digital
dimming circuit.
ML9213 features a ...
The ML9226 is a full CMOS controller/driver for Duplex or Triplex vacuum fluorescent display tube. It conststs
of 32-segment driver outputs and 3-grid pre-driver outputs, so that it can drive directly up to 96-segment VFD.
ML9226 features a digital ...
The ML9227 is a full CMOS controller/driver for Duplex or Triplex vacuum fluorescent display tube. It conststs
of 27-segment driver outputs and 3-grid pre-driver outputs, so that it can drive directly up to 81-segment VFD.
ML9227 features a digital ...
The ML9228 is a full CMOS controller/driver for Duplex or Triplex vacuum fluorescent display tube. It conststs
of 82-segment driver outputs and 3-grid pre-driver outputs, so that it can drive directly up to 246-segment VFD.
ML9228 features a digital ...
The
ML9204 is a 5 x 7 dot matrix type vacuum fluorescent display tube controller
driver IC which displays characters, numerics and symbols of a maximum of 24
digits x 2 lines. Dot matrix vacuum fluorescent display tube drive signals are
generated by ...
The ML9208 is a dot matrix vacuum fluorescent display tube controller driver IC which displays characters,
numerics and symbols.
Dot matrix vacuum fluorescent display tube drive signals are generated by serial data sent from a micro-controller.
A ...
The
ML9211 is a full CMOS controller/driver for Duplex or Triplex (1/2 duty or 1/3
duty) vacuum fluorescent display tube. It consists of a 56-segment driver
multiplexed to drive up to 168 segments, and 10-bit digital dimming circuit.
ML9211 features a ...
The
MSC1162A is a monolithic IC designed for directly driving the grid and anode of
the vacuum fluorescent display tube. The device contains a 40-bit bidirectional
shift register, a 40-bit latch circuit, and 40-output circuit on a single chip.
Display ...
The
MSC1163 is a monolithic IC using the Bi-CMOS process for hybridizing CMOS and
bipolar transistors on the same chip. The logic portion such as the input stage,
shift register and latch is fabricated by CMOS and the output driver requiring a
high ...
The
MSC1164 is a monolithic IC using the Bi-CMOS process technology for hybridizing
CMOS and bipolar transistors on the same chip. The logic portion such as the
input stage, shift register and latch is fabricated by CMOS and the output
driver requiring ...
The
MSC1201 is a 1/2 duty vacuum fluorescent display tube driver implemented in
Bi-CMOS technology. This LSI consists of 64-bit shift registers, 64 latches, PWM
conversion circuit, a digital dimming circuit, 30-segment driver and 2-grid
driver. As the ...
The
MSC1205 is a Bi-CMOS display driver for a 1/2-duty vacuum fluorescent display
tube. It consists of a 64-bit shift register, latch circuits, a digital diming
circuit, and drivers. The MSC1205 provides an interface with a microcomputer
only by three ...
The
MSC1208 is a Bi-CMOS display driver for 1/2-duty vacuum fluorescent display
tube. It consists of 58-bit shift registers, latch circuits, a 10-bit digital
dimming circuit, 4 x 4 switch matrix, and a keyscan circuit for 2-channel,
3-contact rotary ...
The
MSC1209 is a Bi-CMOS display driver for a 1/2-duty vacuum fluorescent display
tube. The MSC1209 consists of an 84-bit shift register, an 84-bit latch circuit,
a 10-bit digital dimming circuit, 42-bit segment drivers, a 2-bit grid circuit,
and a ...
The
MSC1212-01 is a driver IC for VFD implemented in BiCMOS technology. The circuit
consists of a 48-bit shift register and a 48-bit latch; they control display
data, which is output from the display drivers. Since a 64-pin plastic QFP
package is used, ...
The
MSC1218 is a Bi-CMOS driver for 1/3 duty vacuum fluorescent display tube. It
contains a 64-bit shift register, a 63-bit latch, a 10-bit digital dimming
circuit, and three grids. The MSC1218 has only three microcontroller interface
signal lines: ...
The
MSC1230 is a Bi-CMOS display driver with digital dimming function. It enables
switching between 1/3-duty vacuum fluorescent (VF) display tube and universal VF
display tube by pin control. The MSC1230 consists of a 112-bit shift register, a
111-bit ...
MSC1937-01 is a Bi-CMOS alphanumeric display controller designed
to interface with either vacuum fluorescent display.
MSC1937-01 can drive displays with up to 16 digits with either 14 or 16
segments plus a decimal point and comma.
MSC1937-01 provides ...
MSC1951-01 is a Bi-CMOS bargraph and alphanumeric display
controller designed to interface with either vacuum fluorescent display.
MSC1951-01 can drive displays with up to 16 figures with either 16 segment
bargraph or seven- segment type code plus a ...
The MSC7110-01/MSC7112-01 is a display controller to display the timer of video tape recorder, channel operation, and other infomaiton by a vaccum fluorescent display tube. Display data is input by serial transfer from microcontroller. ...
The
MSC7171 is a driver IC designed to directly drive the grids of fluorescent
display tube. It contains a 12-bit shift register and 12 output drivers. Display
data is serially written into the internal 12-bit shift register on the rising
edge of each ...
The
MSM9210 is a full CMOS controller/driver for Duplex or Triplex (1/2 duty or 1/3
duty) vacuum fluorescent display tube. It consists of a 32-segment driver
multiplexed to drive up to 96 segments, and 10-bit digital dimming circuit.
MSM9210 features a ...
The ML9298 is a 12-hour system clock IC that drives 1/2 duty fluorescent display tubes. It has a wide range of
power supply using an oscillation source of 4.194304 MHz. The ML9298 has a time adjustment function in hour,
minute and 30-minute units, and the ...
The ML9209 is an alphanumeric type vacuum fluorescent display (VFD) tube controller driver IC which can
display alphanumeric characters, symbols, and bar charts.
Vacuum fluorescent display tube drive signals are generated by serial data sent from a ...
This device provides all the necessary control functions to provide
the power rails for driving a vacuum fluorescent display (VFD) using
minimal external components. The power supply is based on a quasi-resonant,
discontinuous flyback converter, operating ...
The NJU3426 is a VFD (Vacuum Fluorescent Display) controller/driver to dynamically drive up to 16 segments x 14 digits. It consists of display data RAM,an address counter,command registers,a serial interface and high voltage drivers. The NJU3426 features the ...
The NJU3430 is a Dot Matrix VFD (Vacuum Fluorescent Display) Controller Driver for 16-character 1-line with Icon display. It contains character generator ROM/RAM, address counter, oscilla- oscillation circuit, command register, Icon display RAM, high voltage ...
The NJU6426 is a Dot Matrix LCD controller driver for 8-character or up to 24-character 4-line with loon display in single or combine with some of extension driver. It contains voltage converterbleeder resistanceCR oscillatormicroprocessor interface circuits. ...
The SC16311 is a FIP (Fluorescent Indicator Panel or Vacuum
Fluorescent Display) controller/driver that is driven on a 1/8- to 1/16
duty factor. It consists of 12 segment output lines, 8 grid output lines, 8
segment/grid output drive ...
The SC16312 is a FIP (Fluorescent Indicator Panel, or Vacuum
Fluorescent Display) controller/driver, and its duty is 1/4 or 1/11. It
includes 11 segment output lines, 6 grid output lines, 5 segment/grid
output drive lines, a ...
SC16313 is a Vacuum Fluorescent Display (VFD) or Fluorescent
Indicator Panel (FIP) controller/driver that is driven on a 1/4 to 1/8 duty
factor. It consists of 8 segment output lines, 4 grid output lines, 4
segment/grid output lines, ...
SC16315S is a Vacuum Fluorescent Display (VFD) Controller
driven on a 1/4 to 1/8 duty factor. It has eight segment output lines, 4
grid output lines, 4 segment/grid output drive lines, one display
memory, control circuit, key scan ...
VFD Driver/Controller IC with Character RAM ,PT6302 is a dot matrix VFD Driver/Controller IC utilizing CMOS Technology specially designed to
display characters, numerals, and symbols. PT6302 provides 35 dot matrix plus 2 additional segment
drivers and 16 ...
Dot Character VFD Controller/Driver IC ,PT6314 is a VFD Controller/Driver IC utilizing CMOS technology providing 80 segment outputs and 24
grid outputs. It supports dot matrix displays of up to 16 columns x 2 lines, 20 columns x 2 lines or 24
columns x 2 ...
The MSC1210 is a clock for use in 1/2 duty VFD applications, featuring 4.194304 MHz crystal
controlled oscillator time base, wide ranges of power supply, and 12-hour format. The clock
correction rages are minutes, hours, and a 30-min ADJ (30-minute ...