The CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital data conforming to SMPTE 125M and SMPTE 267M component Video and SMPTE 244M composite ...
The CLC021 SMPTE 259M Digital Video Serializer with EDH Generation and Insertion is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital data conforming to SMPTE 125M and 267M component Video and SMPTE 244M composite ...
The LMH0024 SMPTE 259M / 344M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted
over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data
rates from 143 ...
The LMH0030 SMPTE 292M/259M Digital Video Serializer with Ancillary Data FIFO and Integrated Cable Driver is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital Video data conforming to SMPTE 125M and 267M standard ...
The LMH0031 SMPTE 292M / 259M Digital Video Deserializer/Descrambler with Video and Ancillary Data FIFOs is a monolithic integrated circuit that deserializes and decodes SMPTE 292M, 1.485Gbps (or 1.483Gbps) serial component Video data, to 20-bit parallel data ...
The ADD8701 is a low cost, 16V 12-channel buffer plus integrated high drive amplifier. Two channels swing to the positive rail, while two channels swing to the negative rail. The buffer channels can drive up to 35mA of peak current and 10mA of continuous ...
The AD8123 is a triple, high speed, differential receiver and equalizer that compensates for the transmission losses of UTP and coaxial cables up to 300 meters in length. Various gain stages are summed together to best approximate the inverse frequency ...
The AD8128 is a high speed, differential receiver/equalizer that compensates for the transmission losses of unshielded twisted pair (UTP) CAT-5 cables. Various frequency dependent gain stages are summed together to best approximate the inverse frequency ...
The X98024 3-channel, 8-bit Analog Front End (AFE) contains all the components necessary to digitize analog RGB or YUV graphics signals from personal computers, workstations and Video set-top boxes. The fully differential analog design provides high PSRR and ...
The ISL51002 3-channel, 10-bit Analog Front End (AFE) contains all the functionality needed to digitize analog YPbPr Video from HDTV tuners, settop boxes, SD and HD DVDs, as well as RGB graphics signals from personal computers and workstations. The fourth ...
The ISL51002 3-channel, 10-bit Analog Front End (AFE) contains all the functionality needed to digitize analog YPbPr Video from HDTV tuners, settop boxes, SD and HD DVDs, as well as RGB graphics signals from personal computers and workstations. The fourth ...
The ISL51002 3-channel, 10-bit Analog Front End (AFE) contains all the functionality needed to digitize analog YPbPr Video from HDTV tuners, settop boxes, SD and HD DVDs, as well as RGB graphics signals from personal computers and workstations. The fourth ...
The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr Video signals and RGB graphics signals from DVD players, digital VCRs, Video set-top boxes, and personal computers. This product familys ...
The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr Video signals and RGB graphics signals from DVD players, digital VCRs, Video set-top boxes, and personal computers. This product familys ...
The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr Video signals and RGB graphics signals from DVD players, digital VCRs, Video set-top boxes, and personal computers. This product familys ...
The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr Video signals and RGB graphics signals from DVD players, digital VCRs, Video set-top boxes, and personal computers. This product familys ...
The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr Video signals and RGB graphics signals from DVD players, digital VCRs, Video set-top boxes, and personal computers. This product familys ...
The X98014 3-channel, 8-bit Analog Front End (AFE) contains all the components necessary to digitize analog RGB or YUV graphics signals from personal computers, workstations and Video set-top boxes. The fully differential analog design provides high PSRR and ...
The X98017 3-channel, 8-bit Analog Front End (AFE) contains all the components necessary to digitize analog RGB or YUV graphics signals from personal computers, workstations and Video set-top boxes. The fully differential analog design provides high PSRR and ...
The X98021 3-channel, 8-bit Analog Front End (AFE) contains all the components necessary to digitize analog RGB or YUV graphics signals from personal computers, workstations and Video set-top boxes. The fully differential analog design provides high PSRR and ...
The X98027 3-channel, 8-bit Analog Front End (AFE) contains all the components necessary to digitize analog RGB or YUV graphics signals from personal computers, workstations and Video set-top boxes. The fully differential analog design provides high PSRR and ...
The EL4543 is a high bandwidth triple differential amplifier with integrated encoding of Video sync signals. The inputs are suitable for handling high speed Video or other communications signals in either single-ended or differential form, and the common-mode ...
The EL5176 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either ...
The ISL59311 is a high bandwidth triple differential amplifier with integrated encoding of Video sync signals. The inputs are suitable for handling high speed Video or other communications signals in either single-ended or differential form, and the ...
The EL9115 is a triple analog delay line that allows skew compensation between any three signals. This part is perfect for compensating for the skew introduced by a typical CAT-5 cable with differing electrical lengths on each pair. The EL9115 can be ...
The ISL54103 DDC Accelerator (DDCA) is a dual active pull-up bus terminator designed to improve data transmission speed on the DDC 2-wire serial bus interfaces. The DDCA detects rising input transitions with two internal voltage references and two ...
The ISL54100, ISL54101, ISL54102 are high-performance TMDS timing regenerators and multiplexers. The receiver contains a programmable equalizer and a clock data recovery (CDR) function for each of the 3 TMDS pairs in an HDMI or DVI signal. The TMDS data ...
The ISL54100, ISL54101, ISL54102 are high-performance TMDS timing regenerators and multiplexers. The receiver contains a programmable equalizer and a clock data recovery (CDR) function for each of the 3 TMDS pairs in an HDMI or DVI signal. The TMDS data ...
The ISL54100, ISL54101, ISL54102 are high-performance TMDS timing regenerators and multiplexers. The receiver contains a programmable equalizer and a clock data recovery (CDR) function for each of the 3 TMDS pairs in an HDMI or DVI signal. The TMDS data ...
The EL4584 is a PLL (Phase Lock Loop) sub system, designed for Video applications but also suitable for general purpose use up to 36MHz. In Video applications, this device generates a TTL/CMOS compatible Pixel Clock (CLK OUT) which is a multiple of the TV ...
The EL4585 is a PLL (Phase Lock Loop) sub-system, designed for Video applications and also suitable for general purpose use up to 36MHz. In Video applications, this device generates a TTL/CMOS-compatible pixel clock (CLK OUT) which is a multiple of the TV ...
The EL4501 is a highly-integrated Video Front End (VFE) incorporating all of the key signal conditioning functions for analog Video signals. It provides a flexible front-end interface for analog or analog/digital Video sub-systems. The VFE contains a high ...
The EL4511 sync separator IC is designed for operation in the next generation of DTV, HDTV, and projector applications, as well as broadcast equipment and other applications where Video signals need to be processed. The EL4511 accepts sync on green, ...
The Enhanced Video Input Processor (EVIP) is a
combination of a two-channel analog preprocessing
circuit including source selectionanti-aliasing filter and
ADCan automatic clamp and gain controla Clock
Generation Circuit (CGC)a digital ...
The SAA7142HL is a combination of two stand-alone multi-standard Video decoders.
The SAA7142HL is a pure 3.3 V (5 V tolerant inputs and I/Os) Complementary
Metal-Oxide Semiconductor (CMOS) circuit and a highly integrated circuit for Video
surveillance ...
The SAA7144HL is a combination of four stand alone multistandard Video decoders.
The SAA7144HL is a pure 3.3 V (5 V tolerant inputs and I/Os) CMOS circuit and a highly
integrated circuit for Video surveillance applications. All four Video decoders are based ...
The SAA7326 (CD10 II) is a single chip combining the
functions of a CD decoder, digital servo and bitstream
DAC. It has an extended operating ambient temperature
range when compared with other CD10 II variants.
The decoder/servo part is based on the ...
The SAA7327 (CD7 II) is a single chip combining the
functions of a CD decoder, digital servo and bitstream
DAC, especially designed for Video CD applications.
The decoder/servo part is based on the SAA737x (CD7)
and is software compatible with this design. ...
The TDA3504 is an integrated circuit which performs Video control functions in a PAL/SECAM decoder for negative colour difference signals -(R-Y) and -(B-Y). The required input signals are luminance and colour difference and a 3-level sandcastle pulse for ...
The TDA4687 is a monolithic integrated circuit with a luminance and a colour difference interface for Video processing in TV receivers. Its primary function is to process the luminance and colour difference signals from a colour decoder which is equipped e.g. ...
The TDA4882 is an RGB pre-amplifier for colour monitor systems with SVGA performance, intended for DC or AC coupling of the colour signals to the cathodes of the CRT. With special advantages the circuit can be used in conjunction with the TDA485x monitor ...
The TDA4886 is a monolithic integrated RGB pre-amplifier for colour monitor systems (e.g. 15\" and 17\") with IPC-bus control and OSD. In addition to bus control, beam current limiting and contrast modulation are possible. The signals are amplified in order to ...
The IP4770CZ16, IP4771CZ16, IP4772CZ16 is connected between the VGA/DVI interface and the Video graphics controller and includes level shifting for the DDC signals, buffering for the SYNC lines as well as high-level ESD protection diodes for the RGB signal ...
The SAA5231 is a bipolar integrated circuit intended as a successor to the SAA5030. It extracts Teletext Data from the
Video signal, regenerates Teletext Clock and synchronizes the text display to the television syncs. The integrated circuit
is intended to ...
The TDA4650 is a monolitic
integrated multistandard colour
decoder for PAL, SECAM and NTSC
(3.58 and 4.43 MHz) with negative
colour difference output signals. The
colour-difference output signals are
fed to the TDA4660/TDA4661,
Switched capacitor delay ...
The TDA4881 is a monolithic integrated RGB amplifier for
colour monitor systems with super VGA performance,
intended for DC or AC coupling of the colour signals to the
cathodes of the CRT. With special advantages the circuit
can be used in conjunction with ...
STw8009, STw8019 is aimed at mobile Video Digital
ENCoder (DENC). This device converts digital
Video signals into high quality analog signal
compliant with TV standards, it is able to encode
interlaced (in all standards) and non-interlaced (in
PAL ...
The STB0899 advanced demodulator from
STMicroelectronics enables digital set-top boxes
to process base-band DVB-S2 signals into digital
Video transport stream data. This data is then
ready to be fed directly to the STB decoder.
By incorporating the DVB-S ...
STMicroelectronics introduces the STV0288, its
TM
latest DVB and DIRECTV QPSK digital receiver,
which adds blind scan capability and DiSEqC 2.0 to
the industry-leading STV0299 and provides a cost
reduction path or new products. ...
The STV0297E is a complete single-chip QAM (quadrature amplitude modulation)
demodulation and FEC (forward error correction) solution that performs sampled IF to
transport stream (MPEG-2 or MPEG-4) block processing of QAM signals. It is intended for
the ...
STMicroelectronics complements STV0360, STV0361 the world
leading range of MPEG-2 decoders with a range of
COFDM demodulators for digital terrestrial
applications.
The STV0360 and STV0361 demodulators are
high performance COFDM (Coded ...
The STV0362 inherits the functionality of the
STV0361 device and embeds new functionalities
required by the DVB-H standard at the physical
layer side. The STV0362 features the full DVB-T
and DVB-H standards framing structure, channel
coding and ...
The STV0900 features a high speed DVB-S2 Forward Error Corrector (FEC) which is designed to handle
up to 180 Mega Channel bits per second at its input. To feed the FEC the STV0900 implements two
identical demodulators, each capable of handling QPSK legacy, ...
The STV0498 is a cable front-end solution for
interactive and PVR set-top boxes.
Built around a powerful 450-DMIP processor
there are three QAM demodulators with FEC, a
DOCSIS modem supporting full DOCSIS2.0
operations and channel bonding up to 120 ...
The STm6316 chip based on leading-edge 0.18
micron CMOS production technology integrates all
the functions required in the DVD optical interface
including analog pre-processing, servo control,
channel decoding and error correction. ...
The QAMi5516 is an integrated demodulator/decoder
solution for digital cable receivers for compressed
Video sound and data services. A QAM demodulator
performs IF to MPEG-2 block processing of QAM
carriers. The demodulated stream is then processed ...
The QAMi5107 provides an integrated demodulator/decoder solution for digital cable
receivers for compressed Video sound and data services. A QAM (quadrature amplitude
modulation) demodulator and FEC performs IF to MPEG-2 block processing of QAM ...
STMicroelectronics has developed two devices
for low cost cable, satellite and terrestrial STBs.
The STi5516 and STi5517 integrate more core
STB functions into a single device than ever
before, offering STB manufacturers the
opportunity to build ...
The STi5107 is the latest in the family of Omega2 set-top box ICs providing a high-
performance, low-cost system-on-chip(SoC) for MPEG processing in cable, satellite or
digital terrestrial STBs. It is a pin compatible IC derived from the STx5105, that ...
The STi5202 is a new generation, set-top
box/DVD decoder chip, and provides very high
performance for low-cost systems. STi5202
includes both VC1 and H.264 Video decoders for
new, low bit rate applications. ...
The STi7100 is a new generation, high-definition set-top box decoder chip, and provides
very high performance for low-cost HD systems. With enhanced performances over the
STi7710, it includes an H.264/AVC decoder for new low-bitrate applications, as well ...
The STi7109 is a new generation, high-definition set-top box / DVD decoder chip, and
provides very high performance for low-cost HD systems. STi7109 includes both Windows
Media Video 9 and H.264 Video decoders for new, low bit rate applications. ...
The STM7710 is exactly the same as the STi7710. The STM7710 is a new generation of
high-definition set-top box decoder chip, and provides very high performance for low-cost
HD systems. ...
Leader in the low-cost FTA satellite market,
STMicroelectronics introduces its latest, low-cost
highly integrated solution for the retail market.
Offering a direct migration path from the
STx5118/STV0288 platform, The STx5188 uses
the same set of IPs, ...
STMicroelectronics sets a new standard for
perfomance, price and integration in the single
chip MPEG-2 set-top box decoder market with the
introduction of the STM5105. ...
STMicroelectronics sets a new standard for
performance, price and integration in the single chip
MPEG-2 set-top-box decoder market with the
introduction of the STM5118. This highly integrated
solution targets mass market FTA set-top boxes,
offers ...
STMicroelectronics introduces the first silicon
device to support the Secure Video Processor
standard: STx5525 STB decoder.
Developed specifically to be an open standard,
SVP technology gives consumers total confidence
that legitimately purchased content ...
The new STi5300 MPEG-2 decoder from ST
provides a step-change in performance for pay TV
set-top boxes and digital Video recorders.
Delivering 1.33 GOPS of processing power
through an ST230 VLIW CPU running at 333 MHz,
ST has ensured that manufacturers ...
The STi7200 is a new generation, high-definition set-top box/DVD decoder chip, and
provides very high performance for low-cost HD systems. With enhanced performance over
the STx7109, it includes both Windows Media Video 9 and H.264 Video decoders for new, ...
STMicroelectronics extends its range of silicon
devices supoorting the Secure Video Processor
standard with the introduction of the STx5524
MPEG decoder. ...
The STV6434 is a filtered Video output interface for
STB and DVD applications.
After removing D/A conversion noises using
integrated low pass filters, the STV6434 adapts in
amplitude and impedance the Video signals coming
from the digital decoder for ...
The STV6435 is a filtered Video output interface for
STB and DVD applications.
After removing D/A conversion noises using
integrated low pass filters, the STV6435 adapts in
amplitude and impedance the Video signals coming
from the digital decoder for ...
Relaying satellite signals from the rooftop dish to
multiple receivers around the home, Digital Video
Recorders (DVR) or throughout an apartment
block is an expensive proposition for system
installers. The SaTCR-1 satellite channel router
addresses this ...
2
The STV9211 is an I C Bus controlled RGB pre-
amplifier designed for Monitor applications, able to
mix the RGB signals coming from any OSD device.
The usual Contrast, Brightness, Drive and Cut-Off
(InfraBlack) Controls are provided. ...
The STV9212 is an I2C-bus controlled color Video
processor designed for standard CRT monitor
applications. It can drive systems where cathodes
are either AC- or DC-coupled to the amplifier
outputs. The three Video channels provide contrast
and white ...
MC44BS373CA: PLL Tuned UHF and VHF Audio Video High Integration Modulator MC44BS373CA The MC44BS373CA audio and Video modulator is for use in VCRs, set-top boxes, and
similar devices. ...
MC44BS374CA: PLL Tuned UHF and VHF Audio Video High Integration Modulator MC44BS374CA The MC44BS374CA audio and Video modulator is for use in VCRs, set-top boxes, and
similar devices. ...
MC44BS374T1: Multi-Standard Audio Video Modulator MC44BS374T1 The MC44BS374T1 and MC44BS374T1A audio and Video modulator are for use in VCRs,
set-top boxes, and similar devices. These products are the next generation of the
MC44BC374T1 with the following ...
The MAX7443/MAX7444 are low-cost, triple-channel
Video reconstruction filters for S-video and CVBS Video
signals. These devices are ideal for anti-aliasing and
DAC smoothing Video applications such as set-top
boxes, DVD players, hard-disk recorders (HDRs), ...
The MAX7443/MAX7444 are low-cost, triple-channel
Video reconstruction filters for S-video and CVBS Video
signals. These devices are ideal for anti-aliasing and
DAC smoothing Video applications such as set-top
boxes, DVD players, hard-disk recorders (HDRs), ...
The MAX9546/MAX9547 differential interface chipset
converts single-ended voltages to differential voltages for
transport and then converts back to single-ended voltages.
These devices eliminate costly, bulky, single-ended
coaxial cables with inexpensive, ...
The MAX9546/MAX9547 differential interface chipset
converts single-ended voltages to differential voltages for
transport and then converts back to single-ended voltages.
These devices eliminate costly, bulky, single-ended
coaxial cables with inexpensive, ...
The MAX7450/MAX7451/MAX7452 complete front-end video-signal conditioners are designed to improve the quality of standard-definition Video signals. The devices restore the DC level of the Video input, correct for amplitude errors up to 6dB, detect fault ...
The MAX7450/MAX7451/MAX7452 complete front-end video-signal conditioners are designed to improve the quality of standard-definition Video signals. The devices restore the DC level of the Video input, correct for amplitude errors up to 6dB, detect fault ...
The MAX7450/MAX7451/MAX7452 complete front-end video-signal conditioners are designed to improve the quality of standard-definition Video signals. The devices restore the DC level of the Video input, correct for amplitude errors up to 6dB, detect fault ...
The TB1305FG and TB1308FG include a component SW block, a
prefilter for AD conversion, sync separation and H/V format
detectors for TV component Video signals.
The TB1305FG and TB1308FG contribute to reduction in the
proportion of PCB occupied by LCR ...
The TB1311AFG includes audio and Video SW blocks, prefilters
for A/D converters, sync separators, and an H/V format detector for
TV signals.
The TB1311AFG contributes to a reduction in the proportion of the
PCB occupied by LCR filters and to the ...
The TB1328FG includes Audio and Video SW blocks, pre-filters for
AD converter, sync separations and an H/V format detector for TV
signals.
The TB1328FG contributes to a reduction in the proportion of PCB
occupied by LCR filters and to the ...
TA1310ANG is Video Chroma and deflection signal. Processing IC
for NTSC. On a 56-pin shrink DIP package. TA1310ANG has
deflection distortion compensation.
2
TA1310ANG uses an I C Bus controls for controllings and
settings. ...
TC90A67F is a Picture-in-Picture (PIP) IC including a PIP
controller and a PAL/NTSC decoder function on a chip.
TC90A67F has an ADC, a Video decoder, a vertical filter, a field
memory, DACs and so on, so that it is easy to design a PIP
application with ...
The M52042FP is a semiconductor integrated circuit (IC) for picture signal processing that has been developed for
NTSC system LCD color TV.
This IC has a built-in luminance signal processing circuit and color signal processing circuit, which is employed to ...
The M52045FP is a semiconductor integrated circuit for Video signal processing that been developed for PAL system
liquid crystal (LCD) color TV. This IC has a built-in luminance signal processing circuit and color signal processing
circuit, which is ...
The M52390FP is a semiconductor integrated circuit that has a function for converting R, G and B signals into
NTSC/PAL composite Video signals, as well as a superimpose function, on a single chip. ...
2
The M52790 is AV switch semiconductor integrated circuit with I C bus control.
This IC contains 2-channels of 4-input audio switches and 2-channels of 4-input Video switches. Each channel can be
controlled independently.
The Video switches contain ...
The M52036SP is a semiconductor integrated circuit for the automatic selection and rectification of sync waveforms.
The IC operates with synchronizing signals in three forms, that is, separate sync(positive or negative polarity, 1 to 5
Vp-p), composite sync ...
The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative
polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video
(sync negative ...