The TL52055 is a wide-bandwidth, 2-input, 1-output, 3-circuit video switch. All inputs are bias types. The select (1C, 2C, 3C) inputs control the signal path of A port and B port. The device can be used for switching separate video signals and component-video ...
The TMDS341 is a 3-port digital video interface (DVI) or high-definition multimedia interface (HDMI) switch that allows up to 3 DVI or HDMI ports to be switched to a single display terminal. Four TMDS channels, one hot plug detector, and an I2C interface are ...
The TS3DS26227 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 2.3 V to 3.6 V. The device offers high-bandwidth data paths, and a break-before-make feature to prevent signal distortion during the transferring of a ...
The TS3DV416 is a 16-bit to 8-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer.
The device provides a low and flat ON-state resistance (ron) and an excellent ...
The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal ...
The TS3V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer, with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state ...
The TI video switch TS3V340 is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN)\\ input. When EN\\ is low, the switch is enabled and the D port is connected to the S port. When EN\\ is high, the switch is disabled and the ...
The TS5V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state ...
The AD8106 and AD8107 are high speed, 16 5 video crosspoint switch matrices. They offer a -3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1% settling. With -78 dB of crosstalk and -97 dB isolation (@ 5 MHz), the ...
The AD8106 and AD8107 are high speed, 16 5 video crosspoint switch matrices. They offer a -3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1% settling. With -78 dB of crosstalk and -97 dB isolation (@ 5 MHz), the ...
The AD8108/AD81091 are high speed 8 x 8 video crosspoint switch matrices. They offer a 3 dB signal bandwidth
greater than 250 MHz and channel switch times of less than
25 ns with 1% settling. With 83 dB of crosstalk and 98 dB
isolation (@ 5 MHz), the ...
The AD8108/AD81091 are high speed 8 x 8 video crosspoint switch matrices. They offer a 3 dB signal bandwidth
greater than 250 MHz and channel switch times of less than
25 ns with 1% settling. With 83 dB of crosstalk and 98 dB
isolation (@ 5 MHz), the ...
An evaluation board is available for this product and may be ordered using the following product number: AD8110-EB and AD8111-EB. Schematic and layout for this evaluation board is contained in the product datasheet. ...
An evaluation board is available for this product and may be ordered using the following product number: AD8110-EB and AD8111-EB. Schematic and layout for this evaluation board is contained in the product datasheet. ...
The AD8112 is a low cost, fully buffered crosspoint switch matrix that operates on 12 V for audio applications and 5 V for video applications. It offers a 3 dB signal bandwidth greater than 60 MHz and channel switch times of less than 60 ns with 0.1% settling ...
The AD8113 is a fully buffered crosspoint switch matrix that operates on 12V for Audio applications and 5V for Video applications. It offers a -3dB signal bandwidth greater than 60MHz and channel switch times of less than 60ns with 0.1% settling for use in ...
The AD8116 is a high speed 16 16 video crosspoint switch matrix. It offers a -3 dB signal bandwidth greater than 200 MHz and channel switch times of 50 ns with 0.1% settling. With -60 dB of crosstalk and -105 dB of isolation (@ 10 MHz), the AD8116 is useful ...
The AD8117/AD8118 are high speed, 32 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
The AD8117/AD8118 are high speed, 32 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
The AD8175 is a high speed, triple 16 9 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With 88 dB of crosstalk and 94 dB isolation (@ 5 MHz), the AD8175 is ...
The AD8176 is a high speed, triple 16 9 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 450 MHz bandwidth and a slew rate of 1650 V/s. With 82 dB of crosstalk and 90 dB isolation (@ 5 MHz), the AD8176 is ...
The AD8177 is a high speed, triple 16 5 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With 88 dB of crosstalk and 94 dB isolation (@ 5 MHz), the AD8177 is ...
The AD8178 is a high speed, triple 16 5 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 450 MHz bandwidth and a slew rate of 1650 V/s. With 82 dB of crosstalk and 90 dB isolation (@ 5 MHz), the AD8178 is ...
The ADG794 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on resistance variation is typically ...
The AD8184 offers a high speed disable feature allowing the
output to be put into a high impedance state. This allows multiple
outputs to be connected together for cascading stages while
the \"OFF\" channels do not load the output bus. It operates ...
The FMS6502 provides eight inputs that can be routed to any of six outputs. Each input can be routed to one or more outputs, but only one input may be routed to any output.
Each input supports an integrated clamp option to set the output sync tip level ...
The FMS6501 switch matrix provides flexible options for todays video applications. The 12 inputs that can be routed to any of nine outputs. Each input can be routed to one or more outputs, but only one input may be routed to any one output. The input to output ...
The Fairchild Video Switch FSAV330 is a quad single pole/double throw high-speed CMOS TTL-compatible video switch. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground ...
The FSHDMI04 is a wide bandwidth switch for routing
HDMI Link Data and Clock signals. This device supports
data rates up to 1.65Gbps per channel for UXGA resolution.
It can also be used to switch TMDS-based DVI digital
video streams. Possible applications ...
The FSAV433 is an ultra low power, high bandwidth video switch specially
designed for switching three analog video signals, including computer RGB and
high definition YPbPr signals. The wide bandwidth (550MHz) of the switch allows
signal passage with ...
The FSAV430 is a high performance Quad SPDT (2-to-1 multiplexer/demultiplexer) video switch designed specifically for switching high definition YPbPr and computer RGB (up to UXGA) signals. The bandwidth of this device is 1.1GHz (Typ) which allows signals to ...
The Fairchild video switch FSAV331 is a dual 4:1 high speed video switch which can be configured as either multiplexer or demultiplexer. Low On Resistance allows inputs to be connected to outputs without adding propagation delay or generating additional ground ...
The FSAV450 is a high performance Quad SPDT (2-to-1 multiplexer/demultiplexer) video switch designed specifically for switching high definition YPbPr and computer RGB (up to UXGA) signals. The bandwidth of this device is 800MHz (Typ) which allows signals to ...
The Fairchild video switch FSAV332 is a quad high speed video switch. Low On Resistance allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.
The device is organized as four 1-bit ...
The EL4544 is a high bandwidth 16-channel differential RGB to 5-channel RGB single-ended RGB-HV video crosspoint switch with embedded sync extraction. There are four 16-Channel input muxes, each capable of receiving a complete RGB video signal, and five output ...
The HA456 is the first 8 x 8 video crosspoint switch suitable for high performance video systems. Its high level of integration significantly reduces component count, board space, and cost. The crosspoint switch contains a digitally controlled matrix of 64 ...
The ISL59530 is a 300MHz 16x16 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
The ISL59531 is a 16x16 integrated video crosspoint switch matrix with differential input and On-Screen Display (OSD) insertion. The ISL59531 is ideal for routing video signals in security and video-on-demand systems. This device operates from a single +5V ...
The ISL59532 is a 300MHz 32x32 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
The ISL59533 is a 32x32 integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) insertion. The ISL59533 is ideal for routing video signals in security and video-on-demand systems. This device operates from a single ...
The ISL59534 is a 300MHz 32x16 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
The HI-524 is a 4-Channel CMOS analog multiplexer designed to process single-ended signals with bandwidths up to 10MHz. The chip includes a 1 of 4 decoder for channel selection and an enable input to inhibit all channels (chip select). Three CMOS transmission ...
The HA4314B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high performance applications. The circuit features very low power dissipation (105mW Enabled, 4mW Disabled), excellent ...
The HA4344B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer display routing, and other high performance applications. This circuit features very low power dissipation, excellent differential gain and phase, ...
The HA4404B is a very wide bandwidth 4 x 1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high performance applications. The circuit features very low power dissipation (105mW Enabled, 4mW Disabled), ...
The ISL59444 is a single-output 4:1 MUX-amp.The MUXamp has a fixed gain of 1 and a 1GHz bandwidth. The ISL59444 is ideal for professional video switching, HDTV, computer display routing, and other high performance applications. The device contains logic ...
The ISL59424 and ISL59445 are 1GHz bandwidth multiplexing amplifiers designed primarily for video input switching. These MUX-amps exhibit a fixed gain of 1 and also feature a high speed three-state to enable the output of multiple devices to be wired together. ...
The LT1203 is a wideband 2-input video multiplexer designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured as a 4-input, 2-output multiplexer. These multiplexers act as SPDT Video Switches with 10ns ...
The LT1204 is a 4-input video multiplexer designed to drive 75 ohms cables and easily expand into larger routing systems. Wide bandwidth, high slew rate, and low differential gain and phase make the LT1204 ideal for broadcast quality signal routing. Channel ...
The LT1203 is a wideband 2-input video multiplexer designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured as a 4-input, 2-output multiplexer.
These multiplexers act as SPDT Video Switches with 10ns ...
The LT1675 is a high speed RGB multiplexer designed for pixel switching and fast workstation graphics. Included on chip are three SPDT switches and three current feedback amplifiers. The current feedback amplifiers drive double-terminated 50 Ohm or 75 Ohm ...
The LT1675 is a high speed RGB multiplexer designed for pixel switching and fast workstation graphics. Included on chip are three SPDT switches and three current feedback amplifiers. The current feedback amplifiers drive double-terminated 50 Ohm or 75 Ohm ...
The LT6555 is a high speed triple 2:1 video multiplexer with an internally fixed gain of 2. The individual amplifiers are optimized for performance with a double terminated 75 Ohm video load and feature a -3dB 2VP-P bandwidth of 450MHz, making them ideal for ...
The LT6556 is a high speed triple 2:1 video multiplexer with an internally fixed gain of 1. The individual buffers are optimized for performance with a 1k load and feature a 2VP-P -3dB bandwidth of 450MHz, making them ideal for driving very high resolution ...
The LT6557 is a high speed triple video amplier with an internal xed gain of 2 and a programmable DC input bias voltage. This amplier features a 400MHz 2VP-P signal bandwidth, 2200V/s slew rate and a unique ability to drive heavy output loads to 0.8V of the ...
The LT6558 is a high speed triple video ampli er with an internal xed gain of 1 and a programmable DC input bias voltage. This amplifier features a 400MHz 2VP-P signal bandwidth, 2200V/s slew rate and a unique ability to drive heavy output loads to 0.8V of ...
The LT6559 is a low cost, high speed, triple amplifier that has been optimized for excellent video performance on a single 5V supply, yet ts in the small footprint of a 3mm 3mm QFN package. With a 3dB bandwidth of 300MHz, a 0.1dB bandwidth of 150MHz, and a ...
The STHDMI002A is a differential Single Pole
Double Throw (SPDT) 2 to 1, low Ron,
bi-directional HDMI switch designed for advanced
TV applications supporting HDMI/DVI which
demand high definition superior image quality.
The differential signal from ...
The STHDMI001A is a differential Single Pole
Double Throw (SPDT) 2-to-1, low R ,
ON
bidirectional HDMI switch. It is designed to
support HDMI/DVI television systems that
produce superior high-definition image quality.
The differential signal from ...
The STDVE003A integrates a 4-channel 3.4 Gbps
TMDS equalizer and a 3:1 switch to select one of
the three HDMI ports. The three input HDMI ports
can be either external ports or internal sources.
High-speed data paths and flow-through pin-out
minimize ...
The STMAV335 is a bi-directional triple (3
channel) Single Pole/Triple Throw (SP3T) high-
speed, low-power CMOS TTL-compatible analog
video switch designed for advanced video
applications which demand superior image
quality. The low ON Resistance (R ) of ...
The STMAV340 is a bidirectional quad (4
channel), high speed single pole/double throw
(SPDT), low power CMOS TTL-compatible analog
video switch designed for advanced video
applications which demand superior image
quality. The low ON Resistance (R ) of ...
This device TEA6425 is intended for switching between vid-
eo and chroma signals such as CVBS, SVHS,
baseband CVBS, MAC. Each input clamp mode,
each output gain, all switching are controlled
2
through the I C bus. The 8 outputs can be set sep-
arately ...
The STV6618 is a highly integrated I2C bus-
controlled video switch matrix, optimized for use in
recordable Digital Video Disk applications or DVD
players. It is adapted to video signals with 1H and
2H formats video routings. It provides required for ...
The STV6688 is a highly-integrated I2C bus-
controlled video switch matrix, optimized for use in
color TV applications.
It is used to control the switching of 4 video signals.
These signals can be in Single Component form
(CVBS) or in Two Component ...
The STV9306B is a fully I2C controlled vertical
deflection IC designed for use in 110, 4:3 or 16:9
CRT applications. It integrates both the vertical
deflection and E/W correction circuits required for
110 chassis. ...
The STV6412A is a highly integrated I C bus-con-
trolled audio and video switch matrix, optimized
for use in digital set-top box applications. It pro-
vides all the audio and video routings required in a
full two SCART set-top box design. ...
The STV6413 is a highly integrated I2C bus-
controlled audio and video switch matrix, optimized
for use in digital set-top box applications. It provides
the audio and video routings required in a two
SCART set-top box design. ...
The MAX4023, MAX4024, MAX4025, MAX4026 family of voltage feedback multiplexer-amplifiers combine low-glitch switching and excellent video specifications with fixed or settable gain. The MAX4024/MAX4026 are triple and quad 2:1 multiplexers, respectively, with ...
The MAX4023, MAX4024, MAX4025, MAX4026 family of voltage feedback multiplexer-amplifiers combine low-glitch switching and excellent video specifications with fixed or settable gain. The MAX4024/MAX4026 are triple and quad 2:1 multiplexers, respectively, with ...
The MAX4023 MAX4026 family of voltage feedback multiplexer-amplifiers combine low-glitch switching and excellent video specifications with fixed or settable gain. The MAX4024/MAX4026 are triple and quad 2:1 multiplexers, respectively, with amplifiers that have ...
The MAX4023, MAX4024, MAX4025, MAX4026 family of voltage feedback multiplexer-amplifiers combine low-glitch switching and excellent video specifications with fixed or settable gain. The MAX4024/MAX4026 are triple and quad 2:1 multiplexers, respectively, with ...
The MAX4359/MAX4360/MAX4456 low-cost video cross-point
switches are designed to reduce component count,
board space, design time, and system cost. Each contains
a matrix of T-switches that connect any of their four
(MAX4359) or eight (MAX4360/MAX4456) ...
The MAX4359/MAX4360/MAX4456 low-cost video cross-point
switches are designed to reduce component count,
board space, design time, and system cost. Each contains
a matrix of T-switches that connect any of their four
(MAX4359) or eight (MAX4360/MAX4456) ...
The MAX4359/MAX4360/MAX4456 low-cost video cross-point
switches are designed to reduce component count,
board space, design time, and system cost. Each contains
a matrix of T-switches that connect any of their four
(MAX4359) or eight (MAX4360/MAX4456) ...
The MAX4550/MAX4570 serial-interface, programmable, dual 4x2 audio/video crosspoint switches are ideal for multimedia applications. Each device contains two identical crosspoint switch arrays, each with four inputs and two outputs. To improve off-isolation, ...
The MAX4550/MAX4570 serial-interface, programmable, dual 4x2 audio/video crosspoint switches are ideal for multimedia applications. Each device contains two identical crosspoint switch arrays, each with four inputs and two outputs. To improve off-isolation, ...
The MAX4356 is a 16 x 16 highly integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) Insertion. This device operates from dual 3V to 5V supplies or from a single +5V supply. Digital logic is supplied from an ...
The MAX4358 is a 32 x 16 highly integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) Insertion. This device operates from dual 3V to 5V supplies or from a single +5V supply. Digital logic is supplied from an ...
The MAX4355 is a 16 x 16 highly integrated video crosspoint switch matrix with input and output buffers. This device operates from dual 3V to 5V supplies or from a single +5V supply. Digital logic is supplied from an independent single +2.7V to +5.5V supply. ...
The MAX4357 is a 32 x 16 highly integrated video crosspoint switch matrix with input and output buffers. This device operates from dual 3V to 5V supplies or from a single +5V supply. Digital logic is supplied from an independent single +2.7V to +5.5V supply. ...
The MAX456 is the first monolithic CMOS 8 x 8 video crosspoint switch that significantly reduces component count, board space, and cost. The crosspoint switch contains a digitally controlled matrix of 64 T-switches that connect eight video input signals to ...
The MAX4111/MAX4121/MAX4221 wideband Video Switches are optimized for high-definition, broadcast-quality, composite (HDTV, NTSC, PAL, SECAM, and RGB) video switching arrays. Their open-loop buffer amp
4f4
lifiers offer 0.1dB gain flatness to 150MHz. They ...
The MAX4111/MAX4121/MAX4221 wideband Video Switches are optimized for high-definition, broadcast-quality, composite (HDTV, NTSC, PAL, SECAM, and RGB) video switching arrays. Their open-loop buffer amp
4f4
lifiers offer 0.1dB gain flatness to 150MHz. They ...
The MAX4111/MAX4121/MAX4221 wideband Video Switches are optimized for high-definition, broadcast-quality, composite (HDTV, NTSC, PAL, SECAM, and RGB) video switching arrays. Their open-loop buffer amp
4f4
lifiers offer 0.1dB gain flatness to 150MHz. They ...
The MAX4141 is a wideband 330MHz, 700V/s 4x1 multiplexer optimized for high-definition, broadcast-quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and ...
The MAX4028/MAX4029 are 5V, triple/quad, 2:1 voltage-feedback
multiplexer-amplifiers with input clamps and a
fixed gain of +2V/V (6dB). Channel 1 (IN1A and IN1B)
inputs are clamped to the video sync tip of the input signal,
while the remaining inputs can ...
The MAX4028/MAX4029 are 5V, triple/quad, 2:1 voltage-feedback
multiplexer-amplifiers with input clamps and a
fixed gain of +2V/V (6dB). Channel 1 (IN1A and IN1B)
inputs are clamped to the video sync tip of the input signal,
while the remaining inputs can ...
The MAX4548/MAX4549 serial-interface, programmable, triple 3x2 audio/video crosspoint switches are ideal for multimedia applications. The devices include three crosspoint switch matrices, each containing three inputs and two outputs. To improve off-isolation, ...
The MAX4548/MAX4549 serial-interface, programmable, triple 3x2 audio/video crosspoint switches are ideal for multimedia applications. The devices include three crosspoint switch matrices, each containing three inputs and two outputs. To improve off-isolation, ...
The MAX4562/MAX4563 serial-interface controlled switches are ideal for multimedia applications. Each device features 30 max on-resistance (RON), 5 RON match, and 5 RON flatness. Audio off-isolation and crosstalk at 20kHz is -85dB, and video off-isolation and ...
The MAX4562/MAX4563 serial-interface controlled switches are ideal for multimedia applications. Each device features 30 max on-resistance (RON), 5 RON match, and 5 RON flatness. Audio off-isolation and crosstalk at 20kHz is -85dB, and video off-isolation and ...
The MAX4584/MAX4585 serial-interface, programmable switches are ideal for multimedia applications. Each device contains one normally open (NO) single-pole/single-throw (SPST) switch and one single-pole/double-throw (SPDT) switch. The MAX4584/MAX4585 feature 65 ...
The MAX4584/MAX4585 serial-interface, programmable switches are ideal for multimedia applications. Each device contains one normally open (NO) single-pole/single-throw (SPST) switch and one single-pole/double-throw (SPDT) switch. The MAX4584/MAX4585 feature 65 ...
The MAX4586/MAX4587 serial-interface, programmable, 4-to-1 channel multiplexers are ideal for multimedia applications. They feature 65 on-resistance, 4 on-resistance matching between channels, and 5 on-resistance flatness. Additionally, they feature -83dB ...
The MAX4586/MAX4587 serial-interface, programmable, 4-to-1 channel multiplexers are ideal for multimedia applications. They feature 65 on-resistance, 4 on-resistance matching between channels, and 5 on-resistance flatness. Additionally, they feature -83dB ...
The MAX498/MAX499 are high-speed, quad/triple, single-pole/double-throw Video Switches with on-board closed-loop buffer amplifiers. The buffer a
584
mplifiers feature +6dB gain (AVCL = 2V/V), 250MHz -3dB bandwidth, 70MHz 0.1dB gain flatness, and 1250V/s ...
The MAX498/MAX499 are high-speed, quad/triple, single-pole/double-throw Video Switches with on-board closed-loop buffer amplifiers. The buffer a
584
mplifiers feature +6dB gain (AVCL = 2V/V), 250MHz -3dB bandwidth, 70MHz 0.1dB gain flatness, and 1250V/s ...
