The BUF602 is a closed-loop buffer recommended for a wide range of applications. Its wide bandwidth (1000MHz) and high slew rate (8000V/??s) make it ideal for buffering very high-frequency signals. For AC-coupled applications, an optional mid-point reference ...
The OPA2652 is a dual, low-cost, wideband voltage feedback amplifier intended for price-sensitive applications. It features a high gain bandwidth product of 200MHz on only 5.5mA/channel quiescent current. Intended for operation on 5V supplies, it also supports ...
The OPA2690 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband current-feedback op amps. A new output stage architecture ...
The OPA2846 provides two very low-noise, high gain bandwidth, voltage-feedback op amps in a single package. Operating from a low 12.6mA/channel quiescent current, each channel provides a 1.2nV/Hz input voltage noise with a 1.65GHz gain bandwidth product. ...
The OPA2889 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional ...
The OPA690 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. A new output stage architecture ...
The OPA847 combines very high gain bandwidth and large signal performance with an ultra-low input noise voltage (0.85nV/Hz\\\\\\\\) while using only 18mA supply current. Where power savings is critical, the OPA847 also includes an optional power shutdown pin ...
The OPA846 combines very high gain bandwidth and large signal performance with very low input voltage noise, while dissipating a low 12.6mA supply current. The classical differential input stage, along with two stages of forward gain and a high power output ...
The OPA843 provides a level of speed and dynamic range previously unattainable in a monolithic op amp. Using a high Gain Bandwidth (GBW), two gain-stage design, the OPA843 gives a medium gain range device with exceptional dynamic range. The ...
The OPA842 provides a level of speed and dynamic range previously unattainable in a monolithic op amp. Using unity-gain stable, voltage-feedback architecture with two internal gain stages, the OPA842 achieves exceptionally low harmonic distortion over a wide ...
The OPA820 provides a wideband, unity-gain stable, voltage-feedback amplifier with a very low input noise voltage and high output current using a low 5.6mA supply current. At unity-gain, the OPA820 gives > 800MHz bandwidth with < 1dB peaking. The OPA820 ...
The OPA890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities provide ...
The THS4001 is a very high-performance, voltage-feedback operational amplifier especially suited for a wide range of video applications. The device is specified to operate over a wide range of supply voltages from 15 V to 2.5 V. With a bandwidth of 270 MHz, ...
The THS4011 and THS4012 are high-speed, single/dual, Voltage Feedback Amplifiers ideal for a wide range of applications. The devices offer good ac performance, with 290-MHz bandwidth, 310-V/??s slew rate, and 37-ns settling time (0.1%). These amplifiers have a ...
The THS4031 and THS4032 are ultralow-voltage noise, high-speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communication and imaging. The single-amplifier THS4031 and the dual-amplifier THS4032 offer very ...
The THS4051 and THS4052 are general-purpose, single/dual, high-speed Voltage Feedback Amplifiers ideal for a wide range of applications including video, communication, and imaging. The devices offer very good ac performance with 70-MHz bandwidth, 240-V/us slew ...
The THS4041 and THS4042 are single/dual, high-speed Voltage Feedback Amplifiers capable of driving any capacitive load. This makes them ideal for a wide range of applications including driving video lines or buffering ADCs. The devices feature high 165-MHz ...
The THS4041 and THS4042 are single/dual, high-speed Voltage Feedback Amplifiers capable of driving any capacitive load. This makes them ideal for a wide range of applications including driving video lines or buffering ADCs. The devices feature high 165-MHz ...
The THS4061 and THS4062 are general-purpose, single/dual, high-speed voltage feed-back amplifiers ideal for a wide range of applications including video, communication, and imaging. The devices offer very good ac performance with 180-MHz bandwidth, 400-V/??s ...
The THS4081 and THS4082 are ultralow-power, high-speed Voltage Feedback Amplifiers that are ideal for communication and video applications. These amplifiers operate off of a very low 3.4-mA quiescent current per channel and have a high output drive capability ...
The THS4081 and THS4082 are ultralow-power, high-speed Voltage Feedback Amplifiers that are ideal for communication and video applications. These amplifiers operate off of a very low 3.4-mA quiescent current per channel and have a high output drive capability ...
The THS4271 and THS4275 are low-noise, high slew rate, unity gain stable Voltage Feedback Amplifiers designed to run from supply voltages as low as 5 V and as high as 15 V. The THS4275 offers the same performance as the THS4271 with the addition of power down ...
The THS4211 and THS4215 are high slew rate, unity gain stable Voltage Feedback Amplifiers designed to run from supply voltages as low as 5 V and as high as 15 V. The THS4215 offers the same performance as the THS4211 with the addition of power down capability. ...
The THS4211 and THS4215 are high slew rate, unity gain stable Voltage Feedback Amplifiers designed to run from supply voltages as low as 5 V and as high as 15 V. The THS4215 offers the same performance as the THS4211 with the addition of power down capability. ...
The OPA4820 provides a wideband, unitygain stable, voltagefeedback amplifier with a very low input noise voltage and high output current using a low 5.7mA/ch supply current. At unitygain, the OPA4820 gives > 600MHz bandwidth with < 1 dB peaking. The OPA4820 ...
The National LMH6628 is a high speed dual op amp that offers a traditional voltage feedback topology featuring unity gain stability and slew enhanced circuitry. The LMH6628\'s low noise and very low harmonic distortion combine to form a wide dynamic range op ...
The LMH6645 (single) and LMH6646 (dual), rail-to-rail input and output Voltage Feedback Amplifiers offer high speed (55MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMH6647, single). Input common mode voltage ...
The LMH6645 (single) and LMH6646 (dual), rail-to-rail input and output Voltage Feedback Amplifiers offer high speed (55MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMH6647, single). Input common mode voltage ...
The LMH6645 (single) and LMH6646 (dual), rail-to-rail input and output Voltage Feedback Amplifiers offer high speed (55MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMH6647, single). Input common mode voltage ...
The LMV116 (single) rail-to-rail output Voltage Feedback Amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118). Output voltage range extends to within 20mV of either supply rail, ...
The LMV116 (single) rail-to-rail output Voltage Feedback Amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118). Output voltage range extends to within 20mV of either supply rail, ...
The LM6172 is a dual high speed voltage feedback amplifier. It is unity-gain stable and provides excellent DC and AC performance. With 100MHz unity-gain bandwidth, 3000V/?s slew rate and 50mA of output current per channel, the LM6172 offers high performance in ...
The LM8262 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range. This device has high output current drive, greater than Rail-to-Rail input common mode voltage range, unlimited capacitive load drive capability, and ...
The LMH6609 is an ultra wideband, unity gain stable, low power, voltage feedback op amp that offers 900MHz bandwidth at a gain of 1, 1400V/?s slew rate and 90mA of linear output current. The LMH6609 is designed with voltage feedback architecture for ...
The LM7171 is a high speed voltage feedback amplifier that has the slewing characteristic of a current feedback amplifier; yet it can be used in all traditional voltage feedback amplifier configurations. The LM7171 is stable for gains as low as +2 or -1. It ...
The LM7121 is a high performance operational amplifier which addresses the increasing AC performance needs of video and imaging applications, and the size and power constraints of portable applications. The LM7121 can operate over a wide dynamic range of ...
The AD8045 is a unity gain stable voltage feedback amplifier with ultralow distortion, low noise, and high slew rate. With a spurious-free dynamic range of -90 dBc @ 20 MHz, the AD8045 is an ideal solution in a variety of applications, including ultrasound, ...
The AD8038 amplifier is a single high-speed (350 MHz) voltage feedback amplifier with an exceptionally low quiescent current of 1.0 mA/amplifier typical (1.5 mA max). The AD8039 dual amplifier is also available. Despite being low power and low cost the ...
The AD8039 amplifier is a dual high-speed (350 MHz) voltage feedback amplifier with an exceptionally low quiescent current of 1.0 mA/amplifier typical (1.5 mA max). Despite being low power and low cost, the amplifier provides excellent overall performance. ...
The AD8057 and AD8058 are Voltage Feedback Amplifiers with the bandwidth and slew rate normally found in current feedback amplifiers. The AD8057 and AD8058 are low power amplifiers having low quiescent current and a wide supply range from 3 V to 12 V. They ...
The AD8047 and AD8048 are very high speed and wide bandwidth amplifiers. The AD8047 is unity gain stable. The AD8048 is stable at gains of two or greater. The AD8047 and AD8048, which utilize a voltage feedback architecture, meet the requirements of many ...
The AD8047 and AD8048 are very high speed and wide bandwidth amplifiers. The AD8047 is unity gain stable. The AD8048 is stable at gains of two or greater. The AD8047 and AD8048, which utilize a voltage feedback architecture, meet the requirements of many ...
The AD8057 and AD8058 are Voltage Feedback Amplifiers with the bandwidth and slew rate normally found in current feedback amplifiers. The AD8057 and AD8058 are low power amplifiers having low quiescent current and a wide supply range from 3 V to 12 V. They ...
The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The ...
The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The ...
The AD9631 and AD9632 are very high speed and wide bandwidth amplifiers. They are an improved performance alternative to the AD9621 and AD9622. The AD9631 is unity gain stable. The AD9632 is stable at gains of two or greater. Utilizing a voltage feedback ...
The AD8055 (single) voltage feedback amplifier offers bandwidth and slew rate typically found in current feedback amplifiers. Additionally, this amplifier is easy to use and available at a very low cost. Despite its low cost, the AD8055 provides excellent ...
The AD9631 and AD9632 are very high speed and wide bandwidth amplifiers. They are an improved performance alternative to the AD9621 and AD9622. The AD9631 is unity gain stable. The AD9632 is stable at gains of two or greater. Utilizing a voltage feedback ...
The AD8056 (dual) voltage feedback amplifier offers bandwidth and slew rate typically found in current feedback amplifiers. Additionally, this amplifier is easy to use and available at a very low cost. Despite its low cost, the AD8056 provides excellent ...
The FHP3131 is a high-performance, voltage-feedback amplifier that consumes only 0.4mA of supply current while providing 70MHz of bandwidth and 50V/s slew rate. The FHP3131 is designed to operate from 2.5V to 12V (6V) supplies. The common mode voltage range ...
The FHP3132 (single) and FHP3232 (dual) are low-cost,
high-performance, voltage feedback amplifi ers that consume
only 2.5mA of supply current per channel, while providing
100mA of output current. These amplifi ers are designed
to operate from 2.7V to 12V ...
The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low-cost, high-performance, Voltage Feedback Amplifiers that consume only 2.5mA of supply current per channel, while providing 100mA of output current. These amplifiers are designed to operate form ...
The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low-cost, high-performance, Voltage Feedback Amplifiers that consume only 2.5mA of supply current per channel, while providing 100mA of output current. These amplifiers are designed to operate form ...
The FHP3350 and FHP3450 are low-cost, high-performance,
voltage-feedback amplifiers designed for video applications.
These triple and quad amplifiers consume only 3.6mA of supply
current per channel and are capable of driving dual (75W) video
loads while ...
The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low-cost, high-performance, Voltage Feedback Amplifiers that consume only 2.5mA of supply current per channel, while providing 100mA of output current. These amplifiers are designed to operate form ...
The FHP3350 and FHP3450 are low-cost, high-performance,
voltage-feedback amplifiers designed for video applications.
These triple and quad amplifiers consume only 3.6mA of supply
current per channel and are capable of driving dual (75W) video
loads while ...
The FHP3132 (single) and FHP3232 (dual) are low-cost,
high-performance, voltage feedback amplifi ers that consume
only 2.5mA of supply current per channel, while providing
100mA of output current. These amplifi ers are designed
to operate from 2.7V to 12V ...
The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use ...
The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use ...
The EL5130 and EL5131 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional ...
The EL5130 and EL5131 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional ...
The EL5132 and EL5133 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional ...
The EL5132 and EL5133 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional ...
The EL5134, EL5135, EL5234, and EL5235 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption ...
The EL5134, EL5135, EL5234, and EL5235 are ultra-low voltage noise, high speed Voltage Feedback Amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption ...
The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use ...
The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use ...
The EL5156, EL5157, EL5256, and EL5257 are 600MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 40kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5156, EL5157, EL5256, and EL5257 are 600MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 40kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use ...
The EL5100, EL5101, and EL5300 represent high-speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the ...
The EL5100, EL5101, and EL5300 represent high-speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the ...
The EL5150, EL5151, EL5250, EL5251, and EL5451 are 200MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of 0.01%, 1mV offsets and 10kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5150, EL5151, EL5250, EL5251, and EL5451 are 200MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of 0.01%, 1mV offsets and 10kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5152, EL5153, EL5252, and EL5455 are 270MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 50kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5152, EL5153, EL5252, and EL5455 are 270MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 50kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5144 series amplifiers are voltage-feedback, high speed, rail-torail amplifiers designed to operate on a single +5V supply. They offer unity gain stability with an unloaded -3dB bandwidth of 100MHz. The input commonmode voltage range extends from the ...
The EL5144 series amplifiers are voltage-feedback, high speed, rail-torail amplifiers EL5246 designed to operate on a single +5V supply. They offer unity gain stability with an unloaded -3dB bandwidth of 100MHz. The input commonmode voltage range extends from ...
The EL5150, EL5151, EL5250, EL5251, and EL5451 are 200MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of 0.01%, 1mV offsets and 10kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5150, EL5151, EL5250, EL5251, and EL5451 are 200MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of 0.01%, 1mV offsets and 10kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5152, EL5153, EL5252, and EL5455 are 270MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 50kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The EL5100, EL5101, and EL5300 represent high-speed Voltage Feedback Amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the ...
The EL5x02 and EL5x03 families represent high-speed VFAs based on a CFA amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the VFA type architecture. With slew rates ...
The EL5150, EL5151, EL5250, EL5251, and EL5451 are 200MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of 0.01%, 1mV offsets and 10kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement ...
The LT6205/LT6206/LT6207 are low cost single/dual/ quad Voltage Feedback Amplifiers that feature 100MHz gain-bandwidth product, 450V/s slew rate and 50mA output current. These amplifiers have an input range that includes ground and an output that swings within ...
The LT6205/LT6206/LT6207 are low cost single/dual/ quad Voltage Feedback Amplifiers that feature 100MHz gain-bandwidth product, 450V/s slew rate and 50mA output current. These amplifiers have an input range that includes ground and an output that swings within ...
The LT6205/LT6206/LT6207 are low cost single/dual/ quad Voltage Feedback Amplifiers that feature 100MHz gain-bandwidth product, 450V/s slew rate and 50mA output current. These amplifiers have an input range that includes ground and an output that swings within ...
The LT6550/LT6551 are 3.3V triple and quad high speed video amplifiers. These Voltage Feedback Amplifiers drive double terminated 50 Ohm or 75 Ohm cables and are configured for a fixed gain of 2, eliminating six or eight external gain setting resistors. The ...
The LT6550/LT6551 are 3.3V triple and quad high speed video amplifiers. These Voltage Feedback Amplifiers drive double terminated 50 Ohm or 75 Ohm cables and are configured for a fixed gain of 2, eliminating six or eight external gain setting resistors. The ...
The OPA2890 represents a major step forward in
unity-gain stable, voltage-feedback op amps. A new
internal architecture provides slew rate and full-power
bandwidth previously found only in wideband,
current-feedback op amps. These capabilities ...
