The AD6528 is the third device in the Analog Devices
?
AD20msp430 series of SoftFone GSM Baseband Processors.
The AD6528 is intended for use in feature-rich Smartphone an
Wireless PDA/handheld computer applications with
GSM/GPRS connectivity. It is ...
The AD9878 is a single-supply cable modem/set-top box mixed-signal front end. The device contains a transmit path interpolation filter, a complete quadrature digital upconverter, and transmit DAC. The receive path contains dual, 12-bit ADCs and a 10-bit ADC. ...
The AD9879 is a single supply Cable Modem/Set Top Box Mixed Signal Front End. The device contains a transmit path interpolation filter, a complete quadrature digital upconverter and transmit DAC. The receive path contains a 12-bit ADC, a 10-bit ADC, and Dual ...
The AD9875 (10-bit) and AD9876 (12-bit) are single supply broadband modem mixed signal front end ICs. They contain the transmit path Interpolation Filter and DAC, and the receive path PGA, LPF and ADC required for a variety of broadband modem applications. ...
The AD9866 is a mixed-signal front end (MxFE) IC for transceiver applications requiring Tx and Rx path functionality with data rates up to 80 MSPS. Its flexible digital interface, power saving modes, and high Tx-to-Rx isolation make it well suited for half- ...
The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can ...
The TN100 transceiver is a highly integrated mixed signal chip that uses the Wireless
communication technology CSS (chirp spread spectrum) developed by Nanotron
Technologies. ...
The ST7538Q is a Half Duplex
synchronous/asynchronous FSK Modem
designed for power line communication network
applications. It operates from a single supply
voltage and integrates a line driver and two linear
regulators for 5V and 3.3V. The device ...
The ST7540 is a Half Duplex
synchronous/asynchronous FSK Modem
designed for power line communication network
applications. It operates from a single supply
voltage and integrates a line driver and two linear
regulators for 5V and 3.3V. The device ...
The STLC4550 is a single chip 802.11b/g WLAN
radio for embedded, low-power and very small
form factor mobile applications. The product
conforms to the IEEE 802.11b and 802.11g
protocols operating in the 2.45GHz ISM
frequency band supporting OFDM data ...
AT76C902 is a highly integrated ASSP that can be used as part of a Wireless phone that utilizes
an 802.11a/b/g Wireless LAN medium and carries voice over IP (VoIP) packets. Specified in this
,
datasheet, an ARM processor based subsystem performs all of the ...
,
The AT76C515A provides dual mode Wireless LAN (Wi-Fi Certified ) access (802.11a or
802.11g) to a host system. It can be configured to support different types of high speed serial or
parallel host interfaces, like USB 2.0, SDIO, PCI/mPCI/CardBus and 8 or ...
The AT76C507 is a single-chip baseband controller that can handle IEEE 802.11b stan-
dard compliant data rates of up to 11 Mbps and provides all processing and functionality
needed for the MAC protocol of IEEE 802.11b.
The AT76C507 incorporates a USB Open ...
The AT76C509 is a Wireless to Ethernet Bridge (VNET-B) that performs the Internet-
working for interconnecting a Wireless LAN with other Wireless LANs (WLAN) and
legacy LANs. It acts as an Access Point (AP) to the WLAN and communicates packets
that are ...
The AT76C511 Dual Ethernet to Wireless LAN Bridge (DEW-B) is a single-chip solution
for interconnecting a Wireless LAN conforming to IEEE 802.11b standard with other
Wireless LANs (WLANs) and legacy LANs.
A DEW-B-based bridge acts as an Access Point (AP) ...
The STLC4370 is a single chip 802.11b/g WLAN
radio for embedded, low-power and very small
form factor mobile applications. The product
conforms to the IEEE 802.11b and 802.11g
protocols operating in the 2.45GHz ISM
frequency band supporting OFDM data ...