Spi Serial E2prom With Block Locktm Protection Inc.

The X25080 is a CMOS 8192-bit serial E2PROM, internally organized as 1K x 8. The X25080 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a Clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is con- trolled through a chip select (CS) input, allowing any number of devices to share the same bus. The X25080 also features two additional inputs that provide the end user with added flexibility. By asserting the HOLD input, the X25080 will ignore transitions on its inputs, thus allowing the host to service higher priority interrupts. The WP input CAN be used as a hardwire input to the X25080 disabling all write attempts to the status Register thus providing a mechanism for limiting end user capability of altering 0, 1/4, 1/2 or all of the memory. The X25080 utilizes Xicors proprietary Direct Write cell, providing a minimum endurance of 100,000 cycles and a minimum data retention of 100 years. By Intersil Corporation
X25080 's PackagesX25080 's pdf datasheet



X25080 Pinout, Pinouts
X25080 pinout,Pin out
This is one package pinout of X25080,If you need more pinouts please download X25080's pdf datasheet.

X25080 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

X25080 Pb-Free X25080 Cross Reference X25080 Schematic X25080 Distributor
X25080 Application Notes X25080 RoHS X25080 Circuits X25080 footprint
Hot categories