XC9213 Synchronous Step-Down DC/DC Controller Input Voltage 25V

XC9213 series is Nch-Nch drive, synchronous, Step-down DC/DC controllers with a built-in bootstrap driver circuit. Output will be stable no matter which load capacitors, including a low ESR capacitor, are used. Resistance (RSENSE) of about 100mW will be required as a Current Sense The phase compensation is also run when a low ESR capacitor is used. In addition, the circuit is double protected by the ways of limiting the current while detecting overshoot current and making output shutdown at any given Timing by a protection time setting capacitor (CPRO). The output voltage CAN be set freely within a range of 1.5V ~ 15V with 1.0V (accuracy 1.5%) of inernal reference voltage by using externally connected resistors (RFB1, 2). Synchronous rectification PWM control CAN be switched to non-synchronous 30mV current limit PFM/PWM Automatic switchable control (=voltage between RSENSE pins) by using the MODE pin.
XC9213 's PackagesXC9213 's pdf datasheet

XC9213 Pinout, Pinouts
XC9213 pinout,Pin out
This is one package pinout of XC9213,If you need more pinouts please download XC9213's pdf datasheet.

XC9213 Application circuits
XC9213 circuits
This is one application circuit of XC9213,If you need more circuits,please download XC9213's pdf datasheet.

Related Electronics Part Number

Related Keywords:

XC9213 Pb-Free XC9213 Cross Reference XC9213 Schematic XC9213 Distributor
XC9213 Application Notes XC9213 RoHS XC9213 Circuits XC9213 footprint