Ata6823 H-bridge Gate Driver With Lin Transceiver, Watchdog, And 5v Regulator

ATA6823 is designed specifically for automotive applications that require high-power motors. It provides four high-current Gate driver outputs capable of driving a wide range of n-channel Power MOSFETs in a full-bridge configuration. A fully integrated Charge Pump with external capacitors provides the Gate voltage for the high-side output stages. ATA6823 supports low-speed LIN-data Communication up to 20 kBaud in compliance with LIN specification 2.0 using a built-in LIN transceiver. Protection features include undervoltage/overvoltage detection and shutdown, overtemperature shutdown, and short circuit detection of motor leads to battery voltage and to ground. Shoot-through protection is guaranteed using a dead-time adjustment which CAN be set by hardware. 2. Application Board The ATA6823 application board allows the running of a DC motor. The supply voltage is 8V to 18V, maximum power of the DC motor is limited by the external H-bridge MOSFETs No Microcontroller is implemented on-board. It is possible to control the motor either via an external Microcontroller (with or without LIN bus), or directly (using the DIR and PWM pins).
application notes                    New application notes
Download application notes and circuits


ATA6823 Application Board Schematic
ATA6823 Application Board Schematic



Related Electronics Part Number
Hot categories